Sale!
H2-Catalytic_Combustor

H2 Comfort

$23,453.06 $22,953.00

INNOVATIVE HEATING SYSTEM FOR HOMES

Hydrogen burned in the H2comfort represents a unique product in the field of zero emission hydrogen products conceived for architecture and domotics. Thanks to its combustion channels, H2comfort is able to generate hot water through
Catalytic Combustion of Hydrogen with efficiency higher than 99%. Since there is no flame because it is a “chemical” exothermal combustion reaction, efficiency is extremely high and can achieve unreached values on the market yet!

Product Description

The catalytic burner is a gas condensing boiler fueled hydrogen; this device is designed and constructed specifically to heat the water for the heating systems. The boiler is designed to provide maximum performance when it is combined with a system of the type at low-temperature radiant heating (radiant floors type) and then with discharge water around 40 °C.
The machine is precisely fed from hydrogen gas; this allows a free combustion flame by using special catalysts.
The hydrogen concentration in the reaction chamber is controlled and kept in conditions of absolute safety values; in this way, the temperature of reaction settles at values of 250°C to 300 °C. This is synonymous with great efficiency, most of the exhaust heat is being recovery and it is a total absence of harmful exhaust emissions and pollutants. In fact, the dreaded NOx are formed only at much higher temperatures, also you have a total absence of even Carbon Dioxide (CO2) as they are not present in carbon atoms in the reaction. Exhaust only water is formed of which part is condensed, while the other is evacuated in the form of steam water from the exhaust chimney. The combustor, having a clean and free of the combustion flame, requires less maintenance compared to a traditional boiler and has a particularly superior durability.

H2 Comfort simply uses hydrogen produced at home using renewable energy sources, and the air is drawn into the ambience producing the enough heat to acclimating a whole house.

H2 Comfort is the result of research and development undertaken by Giacomini Italy & H2Planet with the aim of setting up a cycle of heating of the building with zero emissions taken the energy from the Sun or Wind to heating homes using any alternative energy source.

INNOVATION IN THE HEATING SYSTEM FOR HOMES

Hydrogen burned in the H2 Comfort represents a unique product in the field of zero emission hydrogen products conceived for architecture and domotics. Thanks to its combustion channels, H2comfort is able to generate hot water through
Catalytic Combustion of Hydrogen with efficiency higher than 99%. Since there is no flame because it is a “chemical” exothermal combustion reaction, efficiency is extremely high and can achieve unreached values on the market yet!

MAIN FEATURES

• Powered by Hydrogen
• Reaction Channel optimized
• Catalytic combustion without flame at low concentration hydrogen
• Recovery system for the unused heat from the exhaust system
• Meets all safety standards
• Zero emissions
• Integrated digital monochrome touch screen control panel

MAIN TECHNICAL FEATURES

Catalytic Combustor H2Comfort Model
Category : I2H
Rated heating capacity: 5.01 kW
Rated thermal input: 5,36 kW
Nominal efficiency (maximum): 106.9%
Gas used: Hydrogen
Supply Pressure:  5 bar at ± 0,5
Hydrogen purity accepted: 99.5%
Hydrogen consumption at rated power:  1.67 Nm3/h
Maximum temperature in the catalyst system: 400 °C
Average temperature of exhaust: 40 °C
Maximum concentration of hydrogen in the reaction chamber: 3%
Pressure in the reaction chamber: 30 mbar
Maximum amount of condensate moisture 1,34 (pH, ca 5 – 5,5) l/h
Standard NOx production: 0 ppm
Standard CO2 production: 0 ppm
Maximum Water Heat Circuit Pressure: 3 bar
Flow control temperature: 30-60 °C
Water Content in Generator: 2.1 Iiters
Power supply voltage: 230V & 120V
Power supply frequency: 50Hz / 60Hz
Nominal electrical power: 350 W
Net weight: 40 kg
Length: 888 mm
Width: 250mm
Height: 314 mm
Exhaust Duct Diameter: 230 mm
Power Connection: 1/2 inch
Heating fittings: 3/4 inches
Standard of protection degree against moisture and water penetration: IPX4D

Science Fiction

Reviews

There are no reviews yet.

Be the first to review “H2 Comfort”

Your email address will not be published. Required fields are marked *